Every vehicle owner must know how to change their Car oilS It is a basic process that does not require much effort, but is crucial to do it right. Our experts have collected important tips to know when you perform oil change!
1. Use the correct oil class
We will start with the basics. The first thing to ensure is that you have the right oil class for your car. You can check them in a product guide or look at the oil cap in your car. Open the hood and you will find the cap at where you need to put the oil. The weight can now be 5W-20 or larger, so be sure to use the right product. If you use higher-end oil, you can increase the use of fuel and cause other engine problems. Experts advise consultations a local If you live in a more cold climate. This is because the drastic drops of temperature can compromise Car oil Execution too.
2. Never change the oil immediately after driving the car
Have you returned from a long trip and realized it was time for oil change? Be sure to let the engine cool before replacing the oil. Experts suggest you give the car at least 30 minutes to cool. However, there is another trick in this department. If you have not drove your car, consider turning on the engine in a few minutes. This will ensure that the oil reaches a temperature of about 100 degrees. Thanks to this, it will be easy to replace the oil because it has a better flow when it is warm. Be sure to check the oil is not too hot before changing it or you may risk burning.
3. Use appropriate equipment
The first piece of equipment you need is a drain pan. These items will help to remove the old car oil before replacing it. If you are interested in the planet, we suggest you visit a local store and get a pan for drainage. You use them to drain the oil safely while maintaining the environment protected. You can choose between funnel panels and open top and think about a drainage spout. The selected category depends on your convenience, so try to find out which type fits you best.
4. Do you need a grip to remove oil filters?
Do you have any problems removing the oil filter? This is a common problem when changing oil, which is why you want to use the right tool. Depending on your filter, select a wrench with three jaws with an adjustable end cap, chain, nail or wrench. For example, a bracket style tool is excellent for providing tight grip, but they are not suitable for limited spaces. The nail tool is scattered, which is why the style of the end cap may be the best choice.
5. The oil leaves spots
Here's a critical thing to remember – spots of oil leaves. Do you plan to replace it on your alley or garage? It may be smart to put a tarpaulin or curtain that you do not need under the vehicle. This way you can wrap it after you do and clear each mess immediately. Beginners are those who need to adhere to this advice. Once you have enough experience to avoid leaving any mess, you can skip using these items.
While we are there, let's mention that you should not overflow the vehicle with oil. You want to add a recommended level of oil, so check the optimal level for your car.